Horizontal Multistage Pump

MS

Features

• EBARA’s unique double volute construction provides higher efficiency over a wide range of capacities than conventional pumps equipped with a guide vanes.
• Simple construction of the pumps contributes to longer service life. The pumps are compact, lightweight and operate with minimum of noise.
• Double volute casing designed to balance radial force at all range of operation. Axial force is absorbed by a balance-disc which has a wear indicator at shaft end.
• Parts are fully standardized to ensure easy servicing and maintenance.
• The pumps are designed so as to not exceed rated horse power at any pumping quantity. (Model MS)

Read More

Self-priming Multistage Pump

FMQ

Features

• Energy saving due to high efficiency
• Compact size
• Easy maintenance
• Robust self-priming design

Read More

Self-priming Pump

FQ- FQD

Features

• Self-priming pump; Priming required for initial use only
• Enclosed impeller ensures high efficiency
• Fast pumping action; Special design casing provides very fast action
• BPO (back pull out) system; Over haul without suction/discharge pipe removal
• Non-overload design; Ensures stable performance for all applications
• Sealed ball bearing; Eliminates need of lubrication
• Compact construction; The two-pole high speed motor provides a compact unit and minimizes installation area
• 403 stainless steel shaft; Portion of shaft contacting liquid is made of 403 stainless and is highly resistant to wear

Read More

Slurry Pump

SAL

Features

1. No power overload
Specially designed impeller with a limit load feature is used so that there is never a power overload no matter what the head

2. Low energy consumption and yet highly efficient.
Unique hydraulic design makes this pump more efficient than any other type. The initial rate of efficiency is sustained for reduced electrical power consumption

3. Highly durable
A special wear- resistant iron casting is used for both body and impeller

4. Ample motor output allowance
The motor has ample power output allowance. It will operate without change of output with mixed solutions of 1.1 specific gravity

5. Minimal gland packing leakage
Rear impeller vane ensure minimal leakage from durable gland packing

6. Corrosion and wear resistant materials
Both chrome iron casting and two-phase stainless steel are available. Interchange ability makes a wide range of applications possible.

Read More

Ebara Pentam Chemical and Sea Water Elastomer Pump

FPS

Features

Unlike metal, elastomer is highly resistant to corrosion by acid, sea water and other liquids. However,

it also has drawbacks such as its low strength and low resistance to heat, as well as technical

difficulties associated with its formation. But by utilizing the Nippon Zeon Co. Ltd.’s PENTAM

elastomer, Ebara has overcome these drawbacks and succeeded in developing a high performance

elastomer pump with excellent durability.

• High Efficiency

The pump consumes 20-30% less energy than our earlier plastic pumps, thanks to high efficiency (comparable to cast metal pumps) and the ability to be built according to particular users requirements.

• Low NPSH

The low NPSH design stresses suction performance; the pump can cope with large variation in suction height.

• Easily Disposable

Absence of fiberglass reinforcement in the elastomer material means the pump can be disposed of by incineration – an environment-protecting feature.

• Excellent Resistance to Corrosion

Highly resistant to acids, seawater and other liquids that corrode stainless steel.

• Ample Strength and Durability

3. times thicker than cast iron thickness, with foot support structure, the pump can bear heavy piping loads and is highly durable in terms of deterioration and abrasion.

• Excellent Resistance to Abrasion

The plastic’s highly elastic properties, together with the absence of fiberglass reinforcement means high resistance to abrasion by sand and slurry. Resistance to cavitation’s-corrosion is also excellent.

• Heat Hardening Plastic

Since the plastic has the property of hardening in response to heat, the pump will not seize as a result of friction heat generated by rotor contact or by foreign matter.

• Easy Maintenance

Easy maintenance thanks to lightweight, back-pull-out construction that permits disassembly of major components without removing the piping.

Read More

Mixed Flow Volute Pump

SZ

Features

• Highly efficient and economical.

                  Extremely high efficiency rate of 80%. Small drive motor required significantly reduces operating cost.

• Trouble Free Operation.

                  Semi-open impeller guarantees clog free operation.

• Large Capacity.

Changes in water lever will have little effect on pump capacity. In fact, the higher the water volume, the less horsepower expended.

                  Perfect for irrigation.

• Simple Disassembly and Assembly.

                  Impeller can be easily inspected without removing driver.

                  Simple to disassemble and assemble.

Read More

End Suction Process Pump, API 610

UCW

Features

• Centerline supported heavy duty design
• Back pull-out casing
• Full compliance with API 610 specifications
• All components have been designed for maximum parts interchangeability
• Flexibility of design handles wide range of liquids
• All sizes stocked for last shipment
• Low NPSH performance

Read More